Now Stocking Interlux Bottom Paint 

Click HERE to see our full Interlux line

Johnson Cutless Bearings

Johnson CutlassĀ® APEX | Blackburn Marine
 JOHN-D APEX  (7/8" x 1 3/8" x 3 1/2")
 JOHN-D BACK  (1" x 1-1/4" x 4")
 JOHN-D BAIT  (1" x 1-3/8" x 4")
 JOHN-D BALE  (1" x 1-1/2" x 4")
 JOHN-D BAND  (1" x 1-5/8" x 4")
 JOHN-D BASE  (1" x 2" x 4")
 JOHN-D BEAM  (1-1/8" x 1-1/2" x 4-1/2")
 JOHN-D BELT  (1-1/8" x 1-5/8" x 4-1/2")
 JOHN-D BIND  (1-1/4" x 1-1/2" x 5")
 JOHN-D BIRD  (1-1/4" x 1-3/4" x 5")
 JOHN-D BITE  (1-1/4" x 2" x 5")
 JOHN-D BOAT  (1-3/8" x 1-7/8" x 5-1/2")
 JOHN-D BOLD  (1-3/8" x 2" x 5-1/2")
 JOHN-D BOSS  (1-1/2" x 2" x 6")
 JOHN-D BRAD  (1-1/2" x 2-3/8" x 7")
 JOHN-D BROW  (1-3/4" x 2-3/8" x 7")
 JOHN-D BUCK  (1-3/4" x 2-5/8" x 7")
 JOHN-D CALL  (2" x 2-5/8" x  8")
 JOHN-D CALM  (2" x 3" x 8")
 JOHN-D CARD  (2-1/2" x 3" x 9")
 JOHN-D CART  (2-1/4" x 3-1/8" x 9")
 JOHN-D CORD  (2-1/2" x 3-1/8" x 10")
 JOHN-D CORN  (2-1/2" x 3-3/8" x 10")
 JOHN-D CROW  (2-3/4" x 3" x 9")
 JOHN-D DANE  (3" x 3-3/4" x 12")
 JOHN-D DOCK  (3-1/2" x 4-1/2" x 14")
 JOHN-D OLGA  (4" x 5" x 16")

 
Johnson CutlassĀ® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws. 


Options:
2020 Blackburn Marine. All Rights Reserved.
Ecommerce Web Design by Trone Brand Energy
Loading...